How to Setup and Configure Windows 10
How to Setup and Configure Windows 10 | Create USB Bootable
How to Setup and Configure Windows 10 – Windows 10 is the latest version of Windows by Microsoft. However, it is the last windows version which is launched by windows 8.1. Windows 10 comes up with various features that were not in windows 7 whether the Cortana and Microsoft Edge browser plays a very big role in windows10.
Therefore, if you want to set up and configure the Windows PC 10. Then you are in the right place. Moreover, if you are going to purchase a new laptop or PC you may or not get the preinstalled windows 10 But, some people like to upgrade the windows from their earlier version of windows.
Tech2assist is the company who provides you with technical knowledge. And proper guide on How to set up and configure Windows10. While it is not and hard to task to do, if the windows are not going to configure properly you may face some problems.
So, it will be better to take the guidance or assistance from the professionals. A free Consultation is provided by the tech2assist to Consult with the experts and share what MS technical issues you are facing in Microsoft windows or so.
How to Setup and Configure Windows 10
For any kind of assistance do reach out to us through our chat facilities. You may find our 24×7 customer support very helpful.
How to setup Windows 10 (Make the USB Bootable or Get the CD/DVD of Windows 10)
Before setting up the Windows 10 you must go with the original windows. Well, there are many ways to set up windows 10. But the most suitable is to boot directly from USB Drive or DVD/cd.
But most professionals now go with USB Drive. Following are the ways which are taken into consideration before setting up windows 10 operating system.
USB Bootable: A bootable USB drive is the most preferred method to set up the windows. If you have purchased windows 10 from their official website then you can download it on your PC or laptop. And follow the below method to make your USB bootable with windows 10.
Step 1: Make sure that the USB is inserted into the PC and make sure that the size of the pen drive should be more than the 8 GB.
Step 2: Run the Command Prompt by as the administrator. Then list down the commands step by step are the following:
- DISKPART >>
- LIST DISK >>
- SELECT DISK 0 >>
- CLEAN >>
- CREATE PARTITION PRIMARY >>
- SELECT PARTITION 0 >>
- ACTIVE >>
- FORMAT FS=NTFS QUICK >>
- EXIT >>
Now you are done with the USB Bootable. It’s time to follow the next Step
CD/DVD: There are the same steps that you need to consider while making the CD/DVD bootable with the official setup of Windows 10.
Step 3: Copy the file which you have downloaded from the official site of Microsoft and paste it in the USB Drive normally. (Now you are done with the Bootable Pen drive for the installation of the Windows 10 )
Step 4: Insert the USB drive or DVD/CD into the PC or laptop in which you want to set up or configure the Windows 10.
Step 5: Turn off the PC/Laptop and then start again to press the key F8 to open the boot loader.
(NOTE: Some laptop/PC has different key whether the F8, F12 OR F10). Make the USB on the Priority and Hard drive to the second by which you will easily be able to install the Windows 10
Step 6: Next there will easy steps which will make you install the Windows 10 operating system like the making the partitions and all.
- Select the edition of Windows 10 (if applicable) operating system. This selection must match the edition of your product key activates.
- Click the Next button.
- Check the I accept the license terms to agree. Otherwise, you can’t continue.
- Click the Next button.
- Click on the Custom: Install Windows only (Advanced) option
- Select the partition with the current installation of Windows (usually “Drive 0”), and click the Delete button to remove the partition from the hard drive.
- Select the empty drive (Drive 0 Unallocated disk Space).
- Click the Next button.
Now you are done with the installation process of windows 10. Go further for the setup process and configuration part of Window 10 operating system.
How to setup and Configure the Windows 10?
Once you are done with the installation or setting up process of Windows 10 make sure it is connected to the internet Next, is to configure the Windows 10. following are the steps of configuring process of Windows 10.
Hence, after the installation process of the Windows 10, you will welcome to welcome screen of configuration windows.
Step1: Firstly, you have to set up the region, then click “OK”
Step 2: Select your keyboard layout. Click the “YES” button.
Step 3: Click the “SKIP” button.
Step 4: If you’re using a Wi-Fi connection, you’ll be prompted to enter the wireless credentials to connect. However, if you’re using an Ethernet connection, your device will connect online automatically.
Step 5: Click the Set up for personal use option.
Step 6: Click the Next button.
Type your Microsoft account information. (If you are connected with WI-FI than you may probably get this to login in the Microsoft account)
Step 7: Click the Next button.
Step 8: Type your Microsoft account password. Click the Next button. Click the Set a PIN button.
Step 9: The last part of the configuration part. Once you setup with all the thing in windows10 you will be welcome to the welcome screen of windows 10 or desktop. First thing you have to do is to Install the key that is given by the Microsoft Offical. To install this, you need to go to settings >> on windows update and security >> activation >> type the key, to activate the windows 10 operating system properly.
How to install Windows 10 on USB or external hard disk?
In this tutorial, learn how to install and configure Windows 10. It includes installing Windows 10, setting default settings, configuring devices and managing files. Before you start your new installation, make sure that your computer meets the minimum requirements for Windows 10 to be installed successfully. If you have the proper hardware, you can find more information on Microsoft’s recommended specifications using our live chat option by visiting windows installation live chat support.
First of all, open up File Explorer by clicking on the Start Menu then clicking on File Explorer or pressing Ctrl+Shift+E keys simultaneously. Now click on This PC which is a shortcut icon next to the words This Computer in the left pane of the File Explorer window and then right click on C: and select format.
Once you do that, click on the drive’s name in File Explorer and select manage to see your drives and their size. Now connect an external hard disk or a USB flash drive to the computer. Click on this device in File Explorer and then on properties to see its size and make sure it is at least 1 GB large per Windows 10 installation.
Windows 10 is the latest version of Microsoft’s operating system that is available in both 32-bit and 64-bit versions. You can easily install Windows 10 on a USB or external hard disk to restore your system after its been corrupted or lost. This guide will teach you how to do that. .
Step 1:
Format the USB or external hard disk before you start installing Windows 10 on a USB or external hard disk, you should format it with FAT32 so that your Windows 10 installation will be compatible.
You can use the Disk Management tool from Computer Management to do this; if your computer is running Windows 8.1, open PC Settings and search for “device installation” in the search bar.
On a Mac, open Disk Utility from Applications > Utilities and choose your USB/external hard disk from the menu on the left. From there you can format it as FAT32.
Step 2:
Download Windows 10 ISOAs of this writing, Windows 10 is available for free download via Microsoft’s Windows 10 page at https://www.microsoft.com/en-in/software-download/windows10
First, click the ‘Free Download button. You will be asked to enter your email address and optional phone number in order to provide Microsoft with a way to contact you for your free product key should you choose to upgrade. If you have been using Windows 10, you can use the same email address and phone number to retrieve your product key.
Next, you will be redirected to a page where you can download the ISO file of Windows 10.
Step 3:
Mount Windows 10 ISO If you are using a virtual machine, it is recommended that you save the ISO file of Windows 10 on your host’s hard drive or a USB drive.
You can always go to your previous system point using system restore from the control panel.
Approach Tech2Assist for Instant Tech Support on Windows 10
Here at Tech2assist, we are a web portal dedicated to solving all your technology-related problems. You may contact us at any time because our customer care help is always at your disposal. You can also visit our site using any browser(Google chrome, Internet explorer, Microsoft edge) and type this link for any windows 10 setup process.
Our experts with the help of chatroom services will make sure to help you right away. Your troubles will be gone with our expert knowledge in everything windows related to. So feel free to reach out to us on our 24×7 open services.
People also search for
How to Upgrade Windows 7 to Windows 10 Offline
Startup Repair : What You Should Do If Windows 10 Fails to Start